Seed Slotter

Invented by a professional greenkeeper, the Seed Slotter is an excellent tool for any grass seeding application. It is particularly useful for overseeding worn areas of turf. The ideal tool for the seed of rye and fescue varieties which are difficult to place at the right depth. On soft turf, hand pressure is sufficient to produce slots of the right depth for the seed to be used. On harder areas, foot pressure may also be required. The handle is offset so as to allow either foot to be used. The Seed Slotter is an extremely easy piece of equipment to use. The soil should be moist enough to allow easy penetration. After slotting, brush the seeds into the slots using just enough for one or two seeds per slot. There is no need to top dress.

Plugger

Removes 3”(7.5cm) diameter plugs to a depth of 5” (12cm). Fitted with a foot stirrup for quick and continuous usage. Ideal for patch repair, planting bulbs, small plants etc.

Dragmat

Made from best quality stainless steel. Supplied complete with Chain Bridle and Pull Handle. Rolls up for storage.
Model A: 3’ wide x 4’ long; weight 13kg
Model B: 6’ wide x 4’ long weight 26kg

Hexagonal Turf Doctor

This tool cuts hexagonal shaped pieces of turf 7” (180mm) across, to a depth of 3-4”(80-100mm). By using bodyweight either standing or jumping on the tool no other equipment is required.

Corer Collector

Designed for Aeration / Soil Coring providing assistance with irrigation, seeding, de-compacting areas, to aid root growth etc.

The clever yet simple design that makes this tool unique is the collection box, which catches all of the crumpling remnants that eject through the five 4” x 1/2”(100 x 12.7mm) replaceable hollows tines, leaving no mess to clear up!

The Corer Collector can be dis-assembled allowing for tine change (solid tines available), or to will allow fewer tines in exceptionally compact ground.

LEVELAWNS/LUTES
Greenkeeper Models
A ’-30 ”(76cm)and ‘B ’-36 (91cm)

The lightweight but strong design of these Greenkeeper Levelawn makes them ideal for spreading screened top soil, sand, peat and similar dressing materials. The three inner bars are open at the top and tend to catch any small stones in the dressings. Both models are slightly flexible and will follow the contours of golf greens without causing scars. Both are equally suitable for use on bowling greens, lawn tennis courts, domestic lawns and other fine turf areas, the wider model covering the ground quicker. Both the 30” and the 36” widths come complete with a 6’ wood handle. Construction is pressed sheet steel, zinc plated. Weights are 3 and 4kgs respectively.

Turf Slitter

A highly effective tool for replacing, renewing, repairing or simply lifting turf quickly and easily. Depth of cut is kept constant by the two skids either side of the tool, which allows equal replacement of extracted turf.